SH9400 Plug and socket and switch detecting equipment Series

Contact：

 Miss Yang 

 Tel：

 086(020)22377587

 086(020)22377588

 Fax：

 086(020)22377568

IEC Testing equipment supplier

Ching Ming Festival Notice

2011 New Year Congratulation

Sunho Seventh Anniversary Celebration together employee birt...

GB/T 1483.4-2009 Lamp head and lamp-holder gauge supplier

2009 National Day holiday arrangements

The success of the third “Sunho Cup” Water Sports

Celebrate Sunho sixth anniversary Travel notification

more...

Products

Home >>> Product Class >>> SH9400 Plug and socket and switch detecting equipment Series

Image	Product Name/Model	Product Description
	Circuit Breaker Life Tester SH9467	Circuit Breaker Life Tester is designed according to the relevant standard requirements of GB10963-1999 and lEC60898-1995. Used for the household and similar products to carry on the mechanical and electrical life test.
	Mobile multi-place socket mechanical strength tester SH9412A	Mobile multi-place socket mechanical strength tester is designed according to the relevant standards requirements of IEC60884, Figure 29. Used to test the mechanical character of the relevant test samples.
	Automatic torque test instrument SH9426B	It is designed according to the relevant standards requirements of IEC60884-1, cl.14.23.2, used to detect whether the mechanical stress produced by the directly insert equipment with bolt to the socket under the normal use conditions (or with the bolt-shooting equipment is used in normal use to the outlet) is within the stated scope under the normal use conditions.Digital display, to facilitate the observation and record, also the use of it is stable and reliable.Fixed the test sample at the clamp of the tester, then rotate the test sample directly, for that you can measure the positive and negative torques. The tester provide a common measurement moments mouth.
	The torque distance tester SH9426A	The torque distance tester is designed according to the relevant standards requirements of IEC60335-1 on the requirements of the test equipment, with the bolt-shooting equipment is used in normal use to the outlet is within the stated scope under the normal use conditions.
	Installation base use in switch socket impact test SH9483	Installation base use in switch socket impact test is designed according to the relevant standards requirements of figure 11 in IEC61058-1
	Installation Wood Box Pine Slots SH9482	It is designed according to the relevant standards requirements of items 19 in IEC60884 to provide the complete sets of equipment (including the installation deal board and coating materials requirements).
	Plug circle degree test device SH9473	Plug circle degree test device is designed according to the relevant standards requirements of figure 8 in the BS1363.
	Plug and socket temperature rise test device SH9471	Plug and socket temperature rise test device is designed according to the relevant standards requirements of figure 17 in the BS1363.
	The pressure of plug surface screws test device SH9470	It is designed according to the relevant standards requirements of figure 6 in the BS1363.
	Mechanical test testing devices SH9469	Mechanical test testing devices is designed according to the relevant standards requirements of figure 2 in the BS1363.
	Leakage Switch GFCI Aging Test bench SH9462	Leakage Switch GFCI Aging Test bench is designed according to the relevant standards requirements of UL-943 standard. Apply to leakage switch of "TEST" and "reset" buttons for aging test
	Integrate performance test table of the leakage switch GFCI release test bench SH9461	Integrate performance test table of the leakage switch GFCI release test bench is designed according to the relevant standards requirements of UL-943 corresponding provisions. Apply for leakage electricity switch for the on and off test, the error-release test, low leakage test, high leakage test, middle line ground test and motor start-overload test and other tests.
	Leakage switch GFCI durability tester SH9460	Leakage switch GFCI durability tester is designed according to the relevant standards requirements of the UL-943 corresponding provisions, use to the socket leakage electrical switch to go on the on and off ability, breaking capacity of the test. Use the pneumatic test methods.
	Without screw terminals bending tester SH9431	Without screw terminals bending tester is designed according to the relevant standards requirements of GB2099.0-1996, 12.3.12 provisions. Mainly use to go for the bending test and for measuring the pressure drop after the No Screw Terminal connected to lead line.
	Connecting line vertical connect reliability tester SH9429	Connecting line vertical connect reliability tester is designed according to the relevant standards requirements of UL486E、CSAC22.2、IEC60998-2-1、IEC60998-2-2 and IEC60947-1 and other relevant requirements.
	Connection Terminal Block temperature heating integrated device SH9428	Connection Terminal Block temperature heating integrated device is designed according to the relevant standards requirements of UL1059、CSAC22.2、UL486E、IEC60998-2-1、IEC60998-2-2、IEC60947-7-1 and IEC60947-7-2, use to detect the connection terminals.
	The firmly degree of the bolt test device SH9427	The firmly degree of the bolt test device is designed according to the relevant standards requirements of section 24.10 (figure 25) in the GB2099.1 and relevant requirements of GB16915.
	The wrest distance tester SH9426	The wrest distance tester is designed according to the relevant standards requirements of GB17935－99（GB8898、GB4943）on the requirements of the test equipment, used to detect whether the mechanical stress which is produce by the Lo-lamp holders mouth to the Lo-lamp socket(or with the bolt-shooting equipment is used in normal use to the outlet ) is within the stated scope under the normal use conditions.
	Plug compression test device SH9425	Plug compression test device is designed according to the relevant standards requirements of GB2099、GB16915 and IEC relevant standard requirements. Use to access the mechanical strength of the plug.
	Non-solid implant test device SH9420	Non-solid implant test device is designed according to chapters 14.2, figure 14 in IEC60884-1.

3Pages

[First][Previous]

1

2

3

[Next][Last]

GuangZhou SUNHO Electronic Equipmennt CO.,LTD
Tel ：86-086(020)22377587、22377588 Fax：(086)020-22377568 PostCode：510310 E-mail：sales@sunho.cc jy@sunho.cc
Address：328ChiGang West Road.HaiZhu.Guangzhou,China

web promotion:Yi Zhan yi-z.com inertnet booth:Yi Zhan