Product Name:
Grow-Wire Ignition Tester
Product Model:
SH5105
Manufacturer:
GuangZhou SUNHO Electronic Equipmennt CO.,LTD
Product file:
No Related Documents
Product Description
Grow-Wire Ignition Tester Time and temperature figures show, so that the observation and records are facilitate and the use of it is stable and reliable.
Grow-Wire Ignition Tester
Detail
1. Overview:
When the electrical components or the parts in the condition of failure or overload, the temperature may reach too high or ignited its nearby parts. Glow-wire test simulate hot components or the heat of the overload resistance or the ignition sources in such a short period of time caused by thermal stress. Using the simulation technology to assess fire risk. Glow-wire test apply to electrical and electronic products, plastic which is used by the household electrical appliances and non-metallic components of insulating material components, such as: The shell of the switch and Relay socket.
2. Characteristics
Grow-Wire Ignition Tester adopts integrated design of some part of test chamber and control part, to facilitate the installation at the scene and debug. The shell of the test chamber and important components are adopted by stainless steel manufacturers, resistant cigarettes and gas corrosion; use the SCR automatic control system to adjust the current automatically, to achieve the purpose of precise temperature control; Time and temperature figures show, so that the observation and records are facilitate and the use of it is stable and reliable
3. Power supply
Model | According to the standard | Average volume | Appearance size (mm) | Weight | Technical requirements |
SH5101 Grow-Wire Ignition Tester | Fit to the requirements of relevant provisions in the GB4943-2001.Mainly used to detect the endurable hot performance of the state materials on the standard components | 0.1 | 710 (width) x 365 (depth) x760 (height) | 25 | The working electrical source: AC220V/10A/50HZ The power of the glow-wire: can adjustable from 0 to199.9W. Digital Display, 0.5 class) The testing time: Can preset from 0 to 99.99S or 99.99min. The machine chamber and the test frame use stainless steel manufacture. Fit to the standard requirements of armored wire, the diameter is 0.5mm and the length is 250mm±5mm. |
Leave a message for product