Product Name:
Needle flame tester
Product Model:
SH5400
Manufacturer:
GuangZhou SUNHO Electronic Equipmennt CO.,LTD
Product file:
No Related Documents
Product Description
Needle flame tester has automatic ignition function, temperature and time figures show, so that the observation and records are facilitate and the use of it is stable and reliable.
Needle flame tester
Detail
When the products under the condition of failure, such as the fault current which flow through the leak path, the components or parts are overheating, and not well contact circumstances are likely to cause fire, it will spread to the other parts nearby, Needle flame test simulate the small flame which produce by the test sample under the failure conditions, using the technical to evaluate the catch fire danger. When the test sample can’t test by the Glow-wire tester or Horizontal-vertical flame chamber tester, it can use the Needle flame tester to test it. If the test samples catch fire during the glow-wire test, the dangerous situation which arise by the burning test also need to use the needle flame tester to test. Needle flame test apply to electrical and electronic products, home appliances components, parts and components, such as: wiring boards, centrifugal switch, rice cooker socket.
Characteristics
Needle flame tester is composed by the test part and control part, using the integrated design, to facilitate the installation at the scene and debug. The shell of the test chamber and the important components are all manufactured by stainless steel, resistant cigarettes and gas corrosion; The automatic degree of control system is high, has automatic ignition function, temperature and time figures show, so that the observation and records are facilitate and the use of it is stable and reliable.
Power supply
AC220V±10%/50Hz。(Other power specifications can be customized).
Model | According to the standard | Average volume | Appearance size | Weight | Technical requirement | Configuration |
SH5401 | GB4706.1和GB5169.5 GB4706.1 and GB5169.5 | 0.1 | 710 (width) x365 (depth) x760 (height) | 25 | 1.The gas source of the test flame is adopted by distributors butane gas, the needle of the burner use the pinhead which diameter is ￠0.5±0.1mm, and the out diameter is less than 0.9mm, long above the 35mm, no air input. The height of the flame can be convenience adjusted 12mm ± 1mm, to regulate according to the standards requirement, it also has a high level measurement apparatus. 2.The temperature of flame measurement rose from 100 ° C ± 2 to 700 ° C ± 3 ° C in the time period of 23.5s±1.0s. 3.The imposing time of the flame can be adjusted in the scope of 0 to 99 minutes and 99seconds, automatic control, it can record the time of combustion duration (Tb) | Without the temperature and time device (automatic ignition) |
SH5401A | 0.5 |
SH5401/T | GB4706.1和GB5169.5 GB4706.1 and GB5169.5 | 0.1 | 30 | With temperature and time measurement device (automatic ignition) |
SH5401A/T | 0.5 |
SH5403 | 符合UL1694 Fit to UL1694 | 0.5 | 1000 (width) x400 (depth) x 1260 (height) | 55 | Without the temperature and time device (automatic ignition) |
Leave a message for product